Clawfoot tub refinishing will be great idea for you since there are a lot of old bathtubs which is available for you today. It is essential for refinishing old bathtub since it can make them look like new. In addition, clawfoot tub refinishing will be a great way for converting the unused tub to be a functional tub.
What are the materials needed for clawfoot tub refinishing?
For the idea of clawfoot tub refinishing, there are some ways you need to prepare such as the tools which include the high volume low pressure spray gun, palm sender, respirator for protecting against the paint fumes, as well as masking tape paper and the sand sender. In addition, the material which you will possibly need include the integrity refinishing coatings primer of EP-acrylic to coat, chemical cleaners, reducers, caulk, and tile and also bonding agent for the porcelain.
What do you need to do for clawfoot tub refinishing?
There are some ways you can do for clawfoot tub refinishing. The first thing you need to do is to ensure that your working area is properly ventilated. Also, it is better for you to wear the safety gear for protecting your skin, eyes, as well as your breathing. It will be much better for you to refinish your tub in an open area. In general, the tub weighs around 250 up to 400 pounds so that you may need help for it.
The next thing you need to do is to close the water main, take the valves off, and also take the drain off and also cover the feet. For protecting the floor, it will be better for you to stretch the plastic sheeting around the tub.
For getting started with your clawfoot tub refinishing, you can take out the old paint as well as the coatings fro the tub and the feet as well. You can do it by using the razor blade, steel wool, and utility knife. For helping you remove the paint, you can use paint stripper for once or two times. If there is still any paint remaining, you can utilize lacquer thinner for removing it. Since it generates fumes, you have to use respirator so that you can protect your respiratory system.
After you have completely removed the paint from the tub, the next thing you have to do for the clawfoot tub refinishing is to scrub the surface using the steel wood and also drain the tub. Take the water into a bucket since it contains any harmful chemicals. For the right method of the disposal, you can follow the rule with your municipality.
The next thing to do as the clawfoot tub refinishing is to utilize the acid-etch cleaner. This cleaner will pass through the porcelain for removing the stains as well as for creating the good surface of the tub. For this step, you can wear latex gloves, respirator, and also glasses. To roughen the tub, you can use rotating palm sander or 240-grit sandpaper. Then, rinse the tub.
The last thing to do for the clawfoot tub refinishing is to moisten the tub as well as cover with degreaser. Scrub and rinse it for removing any residue. Now, you can spray an adherer layer and bonding agent for around 15 minutes. Use an epoxy primer with a paint spray gun for spraying the tub. Do it repeatedly for better result after the first spray is dry. The last is to apply acrylic polymer topcoat as the coat by using the spray gun.
Comments on this entry are closed.